Image 1 of 1
Integrate any Modbus RTU or TCP server device, or both simultaneously, with any KNX device or system. This integration aims to make Modbus register data and resources accessible from a KNX system as if they were a part of the KNX system and vice versa.
Features and benefits
Up to six concurrent Modbus TCP clients supported
The gateway supports up to six simultaneous Modbus TCP clients.
Support for both Modbus RTU and Modbus TCP
The gateway supports both Modbus RTU and Modbus TCP protocols.
Commissioning-friendly approach with Intesis MAPS
Templates can be imported and reused as often as needed, significantly reducing commissioning time.
Configuration tool and gateway automatic updates
Both the Intesis MAPS configuration tool and the gateway's firmware can receive automatic updates.
Support for KNX TP devices
The gateway supports KNX TP (twisted pair) devices.
Control up to 3000 KNX communication objects
Up to 3000 KNX communication objects can be controlled by the gateway.
KNX standard Datapoint Types (DPT) available
KNX standard Datapoint Types (DPT) are available to be used for transmission of data on the bus.
Up to 255 Modbus Devices per Node (RTU and TCP)
A maximum of 255 Modbus Devices per Node can be connected for both Modbus RTU and Modbus TCP.