DC-UPS with Ethernet

$0.00

The CBI60W and CBI600W series with built-in Ethernet SNMP, Modbus TCP/IP and HTTPS protocols can be connected to gateways and switches, providing easy access to battery status, DC-UPS functions and all application data.

The CBI60W and CBI600W series with integrated Ethernet SNMP, Modbus TCP/IP and HTTPS protocols is the new DC-UPS All In One module with output voltages of 12V, 24V or 48V. The module design follows the same reliable performance as the current line of CBI All In One DC-UPSs. The CBI60W and CBI600W All In One series consists of:

Power Supplies
Backup Module
Battery Chargers
Battery Tester

The CBI60W and CBI600W series has always been based on Adelsystem's Battery Care technology:

Battery-specific charging profiles (lead acid, AGM, GEL, NiCd, NiMh, Li-Ion and LiFePO4);
Charge temperature compensation;
Deep discharge protection;
Charging current limiter;
Battery tester (battery connection, polarity reversal, shorted cells, bad internal impedance);
Battery health monitoring

Products

All In One 12Vdc with Modbus TCP/IP, SNMP and HTTPS

- Input: Single-phase 115 – 230 - 277 Vac
- Output Selectable Load:12Vdc 4.5 A
- Output Battery charging:12 Vdc 4.5 A
- Suited for the following battery types: Open Lead
- Acid, Sealed Lead Acid, lead Gel, Ni-Cd, Li-Ion
- Automatic diagnostic of battery status, Battery Life
- Test function (internal Battery Impedance)
- Charging curve IUoU, constant voltage and current
- Four charging levels: Boost, Bulk, Trickle, Recovery
- Protected against short circuit and inverted polarity
- Signal output: for battery Fault, Mains or Back-UP
- Ethernet: SNMP V3, Modbus TCP/IP, HTTPS
- DIN rail and Wall mount

All In One 24Vdc with Modbus TCP/IP, SNMP and HTTPS

- Input: Single-phase 115 – 230 - 277 Vac
- Output Selectable Load:24Vdc 2.5A
- Output Battery charging:24 Vdc 2.5A
- Suited for the following battery types: Open Lead
- Acid, Sealed Lead Acid, lead Gel, Ni-Cd, Li-Ion
- Automatic diagnostic of battery status, Battery Life
- test function (internal Battery Impedance)
- Charging curve IUoU, constant voltage and current
- Four charging levels: Boost, Bulk, Trickle, Recovery
- Protected against short circuit and inverted polarity
- Signal output for: Battery Fault, Mains, Rectifier fail
- Ethernet: SNMP V3, Modbus TCP/IP, HTTPS
- DIN rail and Wall mount
- Input: Single-phase 115 – 277 Vac; 600W
- Output Load: power supply 24 Vdc; 25 A
- Output Battery: charging 24 Vdc; 25 A
- Suited for the following battery types: Open Lead Acid, Sealed
- Lead Acid, lead Gel and Ni-Cd
- Automatic diagnostic of battery status.
- Charging curve IUoU, constant voltage and constant current
- Battery Life Test function (Battery Care)
- Switching technology Four charging levels: Recovery, Bulk,
- Absorption, Boost, and Float
- Protected against short circuit and inverted Batt. polarity
- Signal output (contact free) for discharged or damaged battery
- Signal output (contact free) for Mains or Back-UP
- Modbus RTU for all parameter, Battery and System
- Ethernet: SNMP V3, Modbus TCP/IP, HTTPS
- Protection degree IP20 - DIN rail; Space saving

All In One 48Vdc with Modbus TCP/IP, SNMP and HTTPS

- Input: Single-phase 115 – 230 - 277 Vac
- Output Selectable Load:48Vdc 1.25A
- Output Battery charging:48 Vdc 1.25A
- Suited for the following battery types: Open Lead
- Acid, Sealed Lead Acid, lead Gel, Ni-Cd, Li-Ion
- Automatic diagnostic of battery status, Battery Life
- test function (internal Battery Impedance)
- Charging curve IUoU, constant voltage and current
- Four charging levels: Boost, Bulk, Trickle, Recovery
- Protected against short circuit and inverted polarity
- Signal output for: Battery Fault, Mains, Rectifier fail
- Ethernet: SNMP V3, Modbus TCP/IP, HTTPS
- DIN rail and Wall mount
- nput: Single-phase 115 – 277 Vac; 600W
- Output Load: power supply 48 Vdc; 10A – (12.5 A max)
- Output Battery: charging 48 Vdc; 12.5 A
- Suited for the following battery types: Open Lead Acid, Sealed
- Lead Acid, lead Gel and Ni-Cd
- Automatic diagnostic of battery status.
- Charging curve IUoU, constant voltage and constant current
- Battery Life Test function (Battery Care)
- Switching technology Four charging levels: Recovery, Bulk,
- Absorption, Boost, and Float
- Protected against short circuit and inverted Batt. polarity
- Signal output (contact free) for discharged or damaged battery
- Signal output (contact free) for Mains or Back-UP
- Modbus RTU for all parameter, Battery and System
- Ethernet: SNMP V3, Modbus TCP/IP, HTTPS
- Protection degree IP20 - DIN rail; Space saving