ioMirror E3200 Series

Introduction

The ioMirror E3200 Series, which is designed as a cable-replacement solution to connect remote digital input signals to output signals over an IP network, provides 8 digital input channels, 8 digital output channels, and a 10/100M Ethernet interface. Up to 8 pairs of digital input and output signals can be exchanged over Ethernet with another ioMirror E3200 Series device, or can be sent to a local PLC or DCS controller. Over a local area network, the ioMirror can achieve a low signal latency (typically less than 20 ms). With the ioMirror, remote sensors can be connected to local controllers or display panels over copper, fiber, or wireless Ethernet infrastructures, and signals can be transmitted over virtually unlimited distances, without noise problems.

Features and Benefits

• Direct input-to-output signal communication over IP

• High-speed peer-to-peer I/O within 20 ms

• One physical alarm port for connectivity status

• Utility for quick and easy web-based settings

• Local alarm channel

• Remote alarm message

• Supports Modbus TCP for remote monitoring

Available Models (1)

ioMirror E3210