Image 1 of 3
Image 2 of 3
Image 3 of 3
Introduction
Moxa’s NE-4100 embedded device servers are designed for manufacturers who want to add sophisticated network connectivity to their serial devices. Moxa’s embedded device servers can be used to convert any device with a standard serial interface to an Ethernet-enabled device in no time. The NE-4100 embedded device servers support 10/100 Mbps Ethernet, and provide ready-to-use operation modes, including TCP Server, TCP Client, and UDP. In addition, a Real COM driver is included for backward compatibility with legacy software.
SNMP and Email Alerts for Event Trap and Notification
NE-4100 embedded device servers can be configured to send an SNMP trap or email under the following conditions:
Cold/warm start
Password authentication failure
Change in DSR/DCD line signal
Change in IP address
Change in password
Features and Benefits
10/100 Mbps Ethernet interface
Supports baudrates up to 230.4 kbps
Choice of operation modes: Real COM, TCP Server, TCP Client, and UDP
Supports DHCP, BootP, Static IP, and ARP
SNMP and email alerts for event trapping and notifications
Half the size of a credit card—only 57 × 40 mm
Low power consumption at 1.5 W, with single +5 V input
Available Models (10)
NE-4100T
NE-4100T-T
NE-4110S
NE-4110S-T
NE-4110A
NE-4110A-T
NE-4120S
NE-4120S-T
NE-4120A
NE-4120A-T