MGate 5114 Series

Introduction

The MGate 5114 is an industrial Ethernet gateway with 2 Ethernet ports and 1 RS-232/422/485 serial port for Modbus RTU/ASCII/TCP, IEC 60870-5-101, and IEC 60870-5-104 network communications. By integrating commonly used power protocols, the MGate 5114 provides the flexibility needed to fulfill the various conditions that arise with field devices that use different communications protocols to connect to a power SCADA system. To integrate Modbus or IEC 60870-5-101 devices onto an IEC 60870-5-104 network, use the MGate 5114 as a Modbus master/client or IEC 60870-5-101 master to collect data and exchange data with IEC 60870-5-104 systems.

Features and Benefits

• Protocol conversion between Modbus RTU/ASCII/TCP, IEC 60870-5-101, and IEC 60870-5-104

• Supports IEC 60870-5-101 master/slave (balanced/unbalanced)

• Supports IEC 60870-5-104 client/server

• Supports Modbus RTU/ASCII/TCP master/client and slave/server

• Effortless configuration via web-based wizard

• Status monitoring and fault protection for easy maintenance

• Embedded traffic monitoring/diagnostic information for easy troubleshooting and cloud data transmission for cost evaluation and analysis

• microSD card for configuration backup/duplication and event logs

• Built-in Ethernet cascading for easy wiring

• Redundant dual DC power inputs and relay output

• -40 to 75°C wide operating temperature models available

• Serial port with 2 kV isolation protection

Available Models (2)

• MGate 5114-T

• MGate 5114